GM-S
- LS320GM-S
- LS380GM-S
- LS480GM-S
- LS560GM-S
INJECTOR WITHOUT SERVO MOTOR
MODEL LS320GM-S
INFO TO COME
INJECTOR WITHOUT SERVO MOTOR
MODEL LS380GM-S
| INJECTION UNIT | A | B | C | |
| Screw diameter | mm | 65 | 70 | 80 |
| Theoretical shot volume | cc | 1261 | 1462 | 1910 |
| Theoretical shot weight (PS) | g | 1147 | 1331 | 1738 |
| oz | 40.5 | 46.9 | 61.3 | |
| Screw L:D rate | L/D | 23.7 | 22 | 19.3 |
| Injection pressure | MPa | 201 | 174 | 133 |
| Screw speed | rpm | 145 | ||
| Plasticizing capacity (PS) | g/s | 47.2 | 61.4 | 89.2 |
| CLAMPING UNIT | ||||
| Clamping force | kN | 3800 | ||
| Maximum daylight | mm | 1375 | ||
| Mold opening stroke | mm | 655 | ||
| Space between tie bars | mm | 730 x 700 | ||
| Mold thickness (min – max) | mm | 265 – 720 | ||
| Ejector force | kN | 111.4 | ||
| Ejector stroke | mm | 205 | ||
| Number of ejectors | Unit | 13 | ||
| POWER / HEATING | ||||
| Pump motor | kW | 42.4 | ||
| Hydraulic system pressure | MPa | 17.5 | ||
| Number of temperature control zones | Unit | 4 + 1 | ||
| Heating capacity | kW | 23.1 | ||
| Oil tank capacity | L | 665 | ||
| DIMENSIONES Y PESO | ||||
| Weight | t | 14.4 | ||
| Dimensions | m | 7.73 x 1.77 x 2.2 | ||
INJECTOR WITHOUT SERVO MOTOR
MODEL LS480GM-S
| INJECTION UNIT | A | B | C | |
| Screw diameter | mm | 70 | 80 | 90 |
| Theoretical shot volume | cc | 1655 | 2161 | 2736 |
| Theoretical shot weight (PS) | g | 1506 | 1967 | 2489 |
| oz | 53.1 | 69.4 | 87.8 | |
| Screw L:D rate | L/D | 25.1 | 22 | 19.6 |
| Injection pressure | MPa | 228 | 174 | 138 |
| Screw speed | rpm | 155 | ||
| Plasticizing capacity (PS) | g/s | 65.9 | 95.8 | 133.6 |
| CLAMPING UNIT | ||||
| Clamping force | kN | 4800 | ||
| Maximum daylight | mm | 1555 | ||
| Mold opening stroke | mm | 755 | ||
| Space between tie bars | mm | 830 x 800 | ||
| Mold thickness (min – max) | mm | 265 – 800 | ||
| Ejector force | kN | 111.4 | ||
| Ejector stroke | mm | 250 | ||
| Number of ejectors | Unit | 13 | ||
| POWER / HEATING | ||||
| Pump motor | kW | 52.8 | ||
| Hydraulic system pressure | MPa | 17.5 | ||
| Number of temperature control zones | Unit | 5 + 1 | ||
| Heating capacity | kW | 33.1 | ||
| Oil tank capacity | L | 695 | ||
| DIMENSIONES Y PESO | ||||
| Weight | t | |||
| Dimensions | m | 8.4 x 18.7 x 2.27 | ||
INJECTOR WITHOUT SERVO MOTOR
MODEL LS560GM-S
| INJECTION UNIT | A | B | C | |
| Screw diameter | mm | 70 | 80 | 90 |
| Theoretical shot volume | cc | 1655 | 2161 | 2736 |
| Theoretical shot weight (PS) | g | 1506 | 1967 | 2489 |
| oz | 53.1 | 69.4 | 87.8 | |
| Screw L:D rate | L/D | 25.1 | 22 | 19.6 |
| Injection pressure | MPa | 228 | 174 | 138 |
| Screw speed | rpm | 155 | ||
| Plasticizing capacity (PS) | g/s | 72.7 | 104.7 | 133.6 |
| CLAMPING UNIT | ||||
| Clamping force | kN | 5600 | ||
| Maximum daylight | mm | 1730 | ||
| Mold opening stroke | mm | 880 | ||
| Space between tie bars | mm | 860 x 810 | ||
| Mold thickness (min – max) | mm | 350 – 850 | ||
| Ejector force | kN | 166.4 | ||
| Ejector stroke | mm | 250 | ||
| Number of ejectors | Unit | 17 | ||
| POWER / HEATING | ||||
| Pump motor | kW | 52.8 | ||
| Hydraulic system pressure | MPa | 17.5 | ||
| Number of temperature control zones | Unit | 5 + 1 | ||
| Heating capacity | kW | 33.1 | ||
| Oil tank capacity | L | 695 | ||
| DIMENSIONES Y PESO | ||||
| Weight | t | |||
| Dimensions | m | 9.02 x 1.94 x 2.23 | ||
* Specifications subject to change without previous notice.
* Theoretical shot weight (PS) = theoretical shot volume x 0.91 g/cm³