GT2-B

Home GT2-B

 

  • LS130B
  • LS170B
  • LS210B
  • LS210B
  • LS280B

INJECTOR WITHOUT SERVO MOTOR
MODEL LS130B

   INJECTION UNIT
   Screw diameter mm 35
   Theoretical shot volume cc 120
   Theoretical shot weight (PP) g 87
oz 3.1
   Screw L:D ratio L/D 22
   Injection rate cm³/s 110
   Screw speed rpm 300
   Plasticizing capacity (PS) kg/h 53.3
   CLAMPING UNIT
   Clamping force kN 1300
   Maximum daylight mm 820
   Mold opening stroke mm 410
   Platen dimensions mm 620 x 620
   Space between tie bars mm 410 x 410
   Mold thickness (min – max) mm 230 ~ 445
   Ejector force kN 42
   Ejector stroke mm 100
   Number of ejectors Unit 4 + 1
   POWER / HEATING
   Pump motor kW 15
   Hydraulic system pressure Mpa 17.5
   Number of temperature zones Unit 3 + 1
   Heating capacity kW 6.96

INFO TO COME

INJECTOR WITHOUT SERVO MOTOR
MODEL LS170B

   INJECTION UNIT
   Screw diameter mm 35
   Theoretical shot volume cc 120
   Theoretical shot weight (PP) g 87
oz 3.1
   Screw L:D ratio L/D 22
   Injection rate cm³/s 110
   Screw speed rpm 300
   Plasticizing capacity (PS) kg/h 53.3
   CLAMPING UNIT
   Clamping force kN 1300
   Maximum daylight mm 820
   Mold opening stroke mm 410
   Platen dimensions mm 620 x 620
   Space between tie bars mm 410 x 410
   Mold thickness (min – max) mm 230 ~ 445
   Ejector force kN 42
   Ejector stroke mm 100
   Number of ejectors Unit 4 + 1
   POWER / HEATING
   Pump motor kW 15
   Hydraulic system pressure Mpa 17.5
   Number of temperature zones Unit 3 + 1
   Heating capacity kW 6.96

INJECTOR WITHOUT SERVO MOTOR
MODEL LS210B

   INJECTION UNIT
   Screw diameter mm 45
   Theoretical shot volume cc 254
   Theoretical shot weight (PP) g 183
oz 6.5
   Screw L:D ratio L/D 22
   Injection rate cm³/s 203
   Screw speed rpm 300
   Plasticizing capacity (PS) kg/h 104
   CLAMPING UNIT
   Clamping force kN 2100
   Maximum daylight mm 1000
   Mold opening stroke mm 490
   Platen dimensions mm 760 x 760
   Space between tie bars mm 510 x 510
   Mold thickness (min – max) mm 230 ~ 520
   Ejector force kN 49
   Ejector stroke mm 140
   Number of ejectors Unit 4 + 1
   POWER / HEATING
   Pump motor kW 30
   Hydraulic system pressure Mpa 17.5
   Number of temperature zones Unit 4 + 1
   Heating capacity kW 14.3

INJECTOR WITHOUT SERVO MOTOR
MODEL LS210B

   INJECTION UNIT
   Screw diameter mm 45
   Theoretical shot volume cc 254
   Theoretical shot weight (PP) g 183
oz 6.5
   Screw L:D ratio L/D 22
   Injection rate cm³/s 203
   Screw speed rpm 300
   Plasticizing capacity (PS) kg/h 104
   CLAMPING UNIT
   Clamping force kN 2100
   Maximum daylight mm 1000
   Mold opening stroke mm 490
   Platen dimensions mm 760 x 760
   Space between tie bars mm 510 x 510
   Mold thickness (min – max) mm 230 ~ 520
   Ejector force kN 49
   Ejector stroke mm 140
   Number of ejectors Unit 4 + 1
   POWER / HEATING
   Pump motor kW 30
   Hydraulic system pressure Mpa 17.5
   Number of temperature zones Unit 4 + 1
   Heating capacity kW 14.3

INJECTOR WITHOUT SERVO MOTOR
MODEL LS280B

   INJECTION UNIT
   Screw diameter mm 45
   Theoretical shot volume cc 254
   Theoretical shot weight (PP) g 183
oz 6.5
   Screw L:D ratio L/D 22
   Injection rate cm³/s 295
   Screw speed rpm 300
   Plasticizing capacity (PS) kg/h 104
   CLAMPING UNIT
   Clamping force kN 2800
   Maximum daylight mm 1105
   Mold opening stroke mm 525
   Platen dimensions mm 875 x 875
   Space between tie bars mm 580 x 580
   Mold thickness (min – max) mm 250 ~ 630
   Ejector force kN 67
   Ejector stroke mm 160
   Number of ejectors Unit 12 + 1
   POWER / HEATING
   Pump motor kW 37
   Hydraulic system pressure Mpa 17.5
   Number of temperature zones Unit 5 + 1
   Heating capacity kW 17.2

* Specifications subject to change without previous notice.
* Theoretical shot weight (PS) = theoretical shot volume x 0.91 g/cm³