GT2-S

Home GT2-S

  • LS90S
  • LS120S
  • LS160S
  • LS200S
  • LS260S
  • LS320S
  • LS380S
  • LS480S

MODEL GT2-LS90S

   INJECTION UNIT A B C
   Screw diameter mm 32 35 40
   Theoretical shot volume cc 125 149 195
   Theoretical shot weight (PS) g 113 136 177
oz 4 4.8 6.3
   Screw L:D ratio L/D 23 21 18.4
   Screw speed rpm 260
   Plasticizing capacity (PS) kg/h 45.5 58.9 83
   CLAMPING UNIT
   Clamping force kN 900
   Maximum daylight mm 705
   Mold opening stroke mm 320
   Platen dimensions mm 550 x 550
   Space between tie bars mm 360 x 360
   Mold thickness (min – max) mm 185 ~ 385
   Ejector force kN 31
   Ejector stroke mm 100
   Number of ejectors Unit 4 + 1
   POWER / HEATING
   Pump motor kW 10.7
   Hydraulic system pressure MPa 16
   Number of temperature zones Unit 3 + 1
   Heating capacity kW 6
   Weight ton 3
   Oil tank capacity L 220
   Dimensions m 4.08 x 11.4 x 1.87

MODEL GT2-LS120S

   INJECTION UNIT A B C
   Screw diameter mm 35 38 42
   Theoretical shot volume cc 164 193 236
   Theoretical shot weight (PS) g 149 175 214
oz 5.3 6.2 7.6
   Screw L:D ratio L/D 22.8 21 19
   Plasticizing capacity (PS) kg/h 44.7 65.1 73.5
   CLAMPING UNIT
   Clamping force kN 1200
   Maximum daylight mm 855
   Mold opening stroke mm 410
   Platen dimensions mm 620 x 620
   Space between tie bars mm 410 x 410
   Mold thickness (min – max) mm 185 ~ 445
   Ejector force kN 42
   Ejector stroke mm 100
   Number of ejectors Unit 4 + 1
   POWER / HEATING
   Pump motor kW 13.2
   Hydraulic system pressure MPa 17.5
   Number of temperature zones Unit 3 + 1
   Heating capacity kW 9

MODEL GT2-LS160S

   INJECTION UNIT A B C
   Screw diameter mm 40 45 50
   Theoretical shot volume cc 251 318 393
   Theoretical shot weight (PS) g 229 289 357
oz 8.1 10.2 12.6
   Screw L:D ratio L/D 23.6 21 18.9
   Plasticizing capacity (PS) kg/h 63 86 117
   CLAMPING UNIT
   Clamping force kN 1600
   Maximum daylight mm 936
   Mold opening stroke mm 446
   Platen dimensions mm 690 x 690
   Space between tie bars mm 460 x 460
   Mold thickness (min – max) mm 185 ~ 490
   Ejector force kN 42
   Ejector stroke mm 130
   Number of ejectors Unit 4 + 1
   POWER / HEATING
   Pump motor kW 15.6
   Hydraulic system pressure MPa 17.5
   Number of temperature zones Unit 4 + 1
   Heating capacity kW 11

MODEL GT2-LS200S

   INJECTION UNIT A B C
   Screw diameter mm 45 50 55
   Theoretical shot volume cc 350 432 523
   Theoretical shot weight (PS) g 318 393 476
oz 11.2 13.9 16.8
   Screw L:D ratio L/D 23.3 21 19.1
   Plasticizing capacity (PS) kg/h 73 100 132
   CLAMPING UNIT
   Clamping force kN 2000
   Maximum daylight mm 1010
   Mold opening stroke mm 490
   Platen dimensions mm 760 x 760
   Space between tie bars mm 510 x 510
   Mold thickness (min – max) mm 185 ~ 520
   Ejector force kN 49
   Ejector stroke mm 140
   Number of ejectors Unit 4 + 1
   POWER / HEATING
   Pump motor kW 19.8
   Hydraulic system pressure MPa 17.5
   Number of temperature zones Unit 4 + 1
   Heating capacity kW 14.3

MODEL GT2-LS260S

   INJECTION UNIT A B C
   Screw diameter mm 55 60 65
   Theoretical shot volume cc 630 749 879
   Theoretical shot weight (PS) g 573 682 800
oz 20.2 24.1 28.2
   Screw L:D ratio L/D 22.9 21 19.4
   Plasticizing capacity (PS) kg/h 135 171 229
   CLAMPING UNIT
   Clamping force kN 2600
   Maximum daylight mm 1155
   Mold opening stroke mm 525
   Platen dimensions mm 875 x 875
   Space between tie bars mm 580 x 580
   Mold thickness (min – max) mm 250 ~ 630
   Ejector force kN 67
   Ejector stroke mm 160
   Number of ejectors Unit 12 + 1
   POWER / HEATING
   Pump motor kW 20.4
   Hydraulic system pressure MPa 17.5
   Number of temperature zones Unit 5 + 1
   Heating capacity kW 17.2

MODEL GT2-LS320S

   INJECTION UNIT A B C
   Screw diameter mm 60 65 70
   Theoretical shot volume cc 820 962 1116
   Theoretical shot weight (PS) g 746 876 1016
oz 26.3 30.9 35.8
   Screw L:D ratio L/D 22.8 21 19.5
   Plasticizing capacity (PS) kg/h 154 199 233
   CLAMPING UNIT
   Clamping force kN 3200
   Maximum daylight mm 1235
   Mold opening stroke mm 580
   Platen dimensions mm 950 x 950
   Space between tie bars mm 670 x 670
   Mold thickness (min – max) mm 250 ~ 655
   Ejector force kN 77
   Ejector stroke mm 180
   Number of ejectors Unit 12 + 1
   POWER / HEATING
   Pump motor kW 33.9
   Hydraulic system pressure MPa 17.5
   Number of temperature zones Unit 5 + 1
   Heating capacity kW 17.2

MODEL GT2-LS380S

   INJECTION UNIT A B C
   Screw diameter mm 60 70 75
   Theoretical shot volume cc 891 1212 1392
   Theoretical shot weight (PS) g 810 1103 1266
oz 28.6 38.9 44.7
   Screw L:D ratio L/D 24.5 21 19.6
   Plasticizing capacity (PS) kg/h 157 249 318
   CLAMPING UNIT
   Clamping force kN 3800
   Maximum daylight mm 1375
   Mold opening stroke mm 655
   Platen dimensions mm 1060 x 1060
   Space between tie bars mm 730 x 700
   Mold thickness (min – max) mm 265 ~ 720
   Ejector force kN 111
   Ejector stroke mm 205
   Number of ejectors Unit 12 + 1
   POWER / HEATING
   Pump motor kW 42.4
   Hydraulic system pressure MPa 17.5
   Number of temperature zones Unit 5 + 1
   Heating capacity kW 23.2

MODEL GT2-LS480S

   INJECTION UNIT A B C
   Screw diameter mm 70 80 85
   Theoretical shot volume cc 1385 1810 2043
   Theoretical shot weight (PS) g 1261 1647 1859
oz 44.5 58.1 65.6
   Screw L:D ratio L/D 24 21 19.8
   Plasticizing capacity (PS) kg/h 235 308 403
   CLAMPING UNIT
   Clamping force kN 4800
   Maximum daylight mm 1555
   Mold opening stroke mm 755
   Platen dimensions mm 1165 x 1135
   Space between tie bars mm 830 x 800
   Mold thickness (min – max) mm 265 ~ 800
   Ejector force kN 111
   Ejector stroke mm 250
   Number of ejectors Unit 12 + 1
   POWER / HEATING
   Pump motor kW 52.8
   Hydraulic system pressure MPa 17.5
   Number of temperature zones Unit 5 + 1
   Heating capacity kW 30.9

* Specifications subject to change without previous notice.
* Theoretical shot weight (PS) = theoretical shot volume x 0.91 g/cm³